2017 Cervélo R5 Dura Ace Di2 Roadbike - darkgrey/red

Brand: Cervelo
Product Code: Road Bike 2017
Reward Points: 0
Availability: In Stock

Available Options

* Size:

Qty:  Add to Cart
   - OR -   

Description of Cervélo R5 Dura Ace Di2 Roadbike - 2017 - darkgrey/red

One of the lightest road bikes in the world!

The R5 frameset is be the production version of the RCA version, and will share Squoval 3 shapes to improve aerodynamics and stiffness. The R5 brings Cervelo's RCA engineering into the regular line- up. With the new Squoval 3 TM tube shapes, aero meets ultimate lightweight design. Sure-footed riding is assured with clearance for 700x25c tires. Climbing and cutting through the wind with ease are matched with excellent stability and control.

The R5 builds on the proven Squoval3-profile tubes, big chain stays, and tiny seat stays but it's as if Cervélo turned the volume up a few notches. Key changes including a tapered front end and interesting BBright bottom bracket standard.

Cervélo says that in-house testing revealed definite advantages with a tapered front end but that the commonly accepted 1-1/8" to 1-1/2" standard was actually too rigid. Cervélo ultimately settled on a 'sweet spot' of 1 3/8", using a lower headset standard. The perfectly matched to the frame properties fork is still light but noticeably stiffer with more precise handling. In addition, the lower bearing seat is molded directly into the fork crown, thus eliminating a redundant part and also lending a straighter path for the carbon fibers in that area.

The new Squoval 3 tubes are stiff, light, and now aero, too. Squoval adds enhanced aerodynamics to Cervelos second-generation Squoval tube shapes by sculpting the leading edge and tweaking the trailing edge. With a savings of 7.4 watts compared to second-generation Squoval, Cervelos new Squoval 3 means you no longer have to choose between optimal lightweight engineering and aero advantage.

The BBright concept is even more interesting. Cervelo has long seen advantages with the BB30 system with its stiffer and lighter 30mm diameter but never quite understood why there was so much unsupported spindle on the non-driveside. Instead, BBright adheres to the standard on the driveside but pushes the non-driveside bearing out by 11mm, thus filling in the dead space and providing better axle support but without affecting pedal stance width.
Lay-up optimization - the stiffening plies are added to the sides of the tubes where they have the greatest effect in bending. They are feathered to distribute the loads into the structure. Cervelo also added more plies on the bottom of the down tube, the head tube and the top tube to distribute the loads from a potential head tube impact. Finally, Cervelo added Kevlar to that same area and down tube to prevent catastrophic failure. Razor-thin seatstays - the original Cervelo R3 was the first frame ever to incorporate ultra-thin seatstays. The new R5 series frames feature even smaller seatstay cross sections than before, further increasing the already legendary compliance for the rear wheel. The seat stays are almost unnecessary for the vertical loads, they only provide torsional stiffness. Therefore, Cervelo was able to design the R5 seat stays to act as leaf springs in the vertical plane while having a more standard dimension in the lateral plane for torsional rigidity. Thus it combines strength, comfort, torsional stiffness and minimal weight.
Combining the bigger head tube and BBright shell together left Cervélo with a lot more real estate to play with and they look to have used it well. The asymmetrical down tube is bigger up front and now extra-wide down below, the seat tube is similarly offset and broadened, and the non-driveside chain stay has nearly doubled in breadth.
In addition, while the driveside stay is still offset at the dropout to clear the cogs and chain, the non-driveside stay comes in straight on for better structural efficiency.
Other details include new carbon fiber dropouts, low-friction external cable routing with molded-in carbon housing stops, a carbon fiber seatpost clamp with titanium and aluminum hardware and a keyed shape to keep it from rotating on the frame (the seat clamp and three seat tube slots are offset from each other for more even clamping force), and a slightly altered frame geometry.

The R5 bike is equipped with a number of lightweight parts, namely, HED Ardennes Plus LT Carbon wheels along with a Shimano Dura Ace Di2 drivetrain and high quality FSA and fi'zi:k parts.


Fact Sheet of Cervélo R5 Dura Ace Di2 Roadbike - 2017 - darkgrey/red

Product Name: Cervélo R5 Dura Ace Di2 Roadbike - 2017 - darkgrey/red
Manufacturer: Cervélo Bikes
Item Code: CVB203918
Year: 2017
Manufacturer item code: 61507006x
Material: Carbon
Frame: R5
Headset: FSA IS2 1-1/8 x 1-3/8"
Fork: Cervélo All-Carbon, Tapered R5 Fork
Stem: FSA OS-99 CSI
Size48-51: 90 mm | Size54-56: 100 mm | Size58-61: 110 mm
Bar: FSA K-Force compact
Size48: 38 cm | Size51: 40 cm | Size54-56: 42 cm | Size58-61: 44 cm
Saddle: fi’zi:k Antares
Seatpost: FSA K-Force
Wheels: HED Ardennes Plus LT
Brakes: Shimano Dura-Ace 9000
Crankset: Rotor 3D+ BBright™ (compact)
Crank Arm Length: Size48-51: 170 mm | Size54-56: 172.5 mm | Size58-61: 175 mm
Sprocket Nuance: 52/36
Bottom Bracket: Rotor PF-30
Front Derailleur: Shimano Dura-Ace Di2
Rear Derailleur: Shimano Dura-Ace Di2
Shifter: Shimano Dura-Ace Di2
Sprocket: Shimano Dura-Ace


Related Products (4)